40ft Luxury Good Quality Prefab Modern Container Home

Dimensioned floor plan of this exact unit — a single open-plan flex volume of 259 SF inside a 40'-0" × 8'-0" container, entered through the two sliding bays of the 28'-0" south curtain wall or the steel door in the blind east end, with the covered corner recess at the south-west corner.

Roof and reflected-ceiling plan for the plain container roof: retained camber and drainage to both rails, roof continuing over the covered corner recess, the sealed line-set penetration and condenser bracket, and the 7'-8" lined ceiling with its five LED panels and the air-conditioning grilles photographed inside.

Power and lighting layout: 100A single-phase inlet and load centre at the blind end, eight branch circuits, the five surface LED ceiling panels photographed inside, receptacles along both long walls, GFCI protection at the covered recess, and the air-conditioning circuits.

Mechanical layout for the 18,000 BTU ducted inverter split concealed above the lined ceiling — supply and return grille positions taken from the photographed interior, line set and condensate routing, cross-ventilation strategy, and the capped water and drain stubs left for a future fit-out.

Frame plan for the single 40ft ISO container: corner castings and floor cross-members, the continuous HSS header and mullion posts carrying the 28'-0" glazed curtain wall, the welded moment frame replacing the corner post at the recess, and headers over the north-wall window and service hatch.

Pier and anchorage layout for the 40'-0" × 8'-0" container with the slab-on-grade alternative: 12 bearing points at 8'-0" centres aligned with the curtain-wall mullions, corner-casting anchor bolts, threshold slab at the sliding bays, and the capped service penetrations.

All four exterior elevations drawn to match the photographs: the pale blue corrugated body, the four-bay glazed curtain wall with its two sliding leaves on the south face, the solid north wall with its single sliding window and louvred hatch, the covered corner recess at the west end, and the blind east end with the steel personnel door.

Interior elevations of the finished open shell as photographed: the white sandwich-panel north wall with its sliding window and sockets, the glazed south curtain wall seen from inside with its two sliding bays, and the east end wall with the steel door, load centre and return-air grille.

Transverse section through the open volume showing the 7'-8" finished ceiling inside the 8'-6" standard-height container, the solid north wall with its sliding window, the full-height glazed curtain wall opposite on its HSS header, the ceiling service void, and the roof, wall and floor build-ups.